Introduction
Meet the Barista Morning Bunny—a cozy, handheld knit bunny in a mint-green beanie, striped café tee, caramel oat overalls, denim-look cuffed pants, and cream–mint sneakers. Accessories include a tiny cross-body bean-green satchel and a removable latte cup with simple “foam heart.” This pattern is written to match the photo exactly: cream bunny, mint hat with bean badge, short-sleeve striped top, oatmeal overalls with pocket and bean appliqués, blue cuffed trousers peeking under the hems, and lace-up sneakers. The proportions are plush and friendly, with sturdy legs for standing and forward-tilted arms to “serve” the latte.
Please note: I strive for accuracy in every pattern, but occasional errors can happen. Thank you for understanding and for enjoying my designs.
Form & Proportions Analysis (for Accurate Match)
- Overall height: ~9.5 in / 24 cm to ear tips.
- Head: Gently oval—slightly wider across cheeks; circumference ~7.75 in / 19.5 cm.
- Ears: Tall, standing, each ~2.7 in / 7 cm long; sewn slightly forward on crown.
- Torso: Pear-shaped; waist narrower than hips; joins seamlessly to head.
- Arms: Cylindrical, lightly stuffed, attached slightly forward of side seam to allow holding cup and strap.
- Legs/Feet: Thick cylinders ending in sneaker shoes; feet ~1.6 in / 4 cm long.
- Fabric density: Tightly knit stockinette in the round so stuffing doesn’t peek.
- Angles/joins: Legs knit separately, joined at crotch bridge; head continues from neck with smooth taper; ears worked flat and seamed for sturdiness.
- Clothing fit: Tee is slim; oatmeal overalls are boxy with a single bib pocket and bean motif; trousers are cropped with rib cuffs; beanie is shallow with a visible knit rib brim ring; cross-body bag hangs hip-height with a wooden-button look; latte cup sized to sit in a paw without wires.
Materials & Tools
- Yarn (DK / light-worsted, smooth, non-fuzzy):
- Cream for bunny (A) ~ 55 g
- Mint green for beanie, sneakers, satchel (B) ~ 30 g
- Denim blue for pants and overall straps shadow (C) ~ 35 g
- Oatmeal/caramel for overalls (D) ~ 35 g
- Cream contrast for soles/toe caps/laces (use A)
- Dark cocoa for bean motifs/embroidery (E) small scrap
- Latte tan for cup and “espresso” (F) small scrap
- Warm white for latte art/foam (G) small scrap
- Needles: US 2.5 (3.0 mm) DPNs or long circular for magic loop.
- Gauge (firm for toys): ~28 sts & 38 rnds = 4 in / 10 cm in stockinette in the round (stuffed fabric).
- Notions: 8 mm black safety eyes (2), tapestry needle, markers, polyester fiberfill, two thin oval sole inserts (cardboard/plastic, 1.6 in / 4 cm), one 8–10 mm button (wood-look) for satchel, tiny snap (optional), small craft magnet (optional for cup), fabric glue (optional).
Abbreviations
- k: knit
- p: purl
- st(s): stitch(es)
- rnd(s): round(s)
- inc: increase (kfb unless specified)
- dec: decrease (k2tog unless specified)
- kfb: knit front & back
- k2tog: knit two together
- ssk: slip, slip, knit
- pm / sm: place marker / slip marker
- CO / BO: cast on / bind off
- M1: lifted make one
- dcst: duplicate stitch (embroidery on knit)
- RS / WS: right side / wrong side
- i-cord: knitted cord worked on 2–3 sts
Color Map (match the photo)
- Bunny: A (cream).
- Beanie & satchel & sneaker uppers accent: B (mint).
- Tee: A base with B stripes.
- Overalls: D (oatmeal) with E bean appliqués.
- Pants: C (denim) with A rib cuffs.
- Sneakers: Upper B, toe/sole/laces A.
- Latte cup: body F, rim A, foam heart G.
Bunny: Legs → Body → Head (Seamless)
Legs (make 2; start at feet)
Using A, CO 10 sts; join.
Rnd 1: kfb around (20)
Rnd 2: (k1, kfb) around (30)
Rnd 3: k around
Rnd 4: (k4, kfb) ×6 (36)
Rnd 5: k around
Rnd 6: (k4, k2tog) ×6 (30)
Rnd 7: k around
Rnd 8: (k3, k2tog) ×6 (24)
Rnd 9–10: k around
Switch to C for “sock/hem shadow.”
Rnd 11: (k2, k2tog) ×6 (18)
Rnd 12–20: k around (18). Break yarn on Leg 1; leave on holder. Work Leg 2 to same point without breaking.
📌Thank you for reading the article.
Join for Body (work in C first)
With Leg 2 working yarn: CO 3 sts, k18 from Leg 1, CO 3 sts, k18 from Leg 2 = 42 sts. Place side markers at bridges.
Hips (C): Rnds 1–6: k around. Stuff both legs firmly.
Taper to Waist:
Rnd 7: (k5, k2tog) ×6 (36)
Rnd 8: k around
Rnd 9: (k4, k2tog) ×6 (30)
Rnd 10: k around
Rnd 11: (k3, k2tog) ×6 (24)
Switch to A for bunny belly.
Belly & Neck (A):
Rnd 12: (k3, kfb) ×6 (30)
Rnds 13–16: k around
Rnd 17: (k3, k2tog) ×6 (24)
Rnd 18: (k2, k2tog) ×6 (18)
Rnd 19: k around
Rnd 20: (k1, k2tog) ×6 (12)
Stuff torso into a gentle pear shape; keep neck opening accessible.
Head (continue in A)
Rnd 1: (k1, kfb) ×6 (18)
Rnd 2: (k2, kfb) ×6 (24)
Rnd 3: (k3, kfb) ×6 (30)
Rnd 4: (k4, kfb) ×6 (36)
Rnds 5–8: k around
Insert safety eyes 7 sts apart, ~2 rnds above the widest point.
Rnd 9: (k4, k2tog) ×6 (30)
Rnd10: k around
Rnd11: (k3, k2tog) ×6 (24)
Rnd12: (k2, k2tog) ×6 (18); begin firm stuffing, emphasize rounded cheeks
Rnd13: (k1, k2tog) ×6 (12)
Rnd14: k2tog around (6). Break long tail, draw through.
Face: With E, embroider a small coffee-bean-brown triangle-oval nose and a soft smile.
Ears (make 2; worked flat in A)
CO 8 sts.
Row 1 (RS): k
Row 2: p
Row 3: kfb, k to last st, kfb (10)
Row 4: p
Repeat Rows 3–4 3 more times to 16 sts.
Work 10 rows even.
Decrease on RS for 4 repeats: (k2tog, k to last 2, ssk). You’ll return to 8 sts.
BO. Fold lengthwise, seam to make a firm ear; optionally insert a trimmed pipe cleaner. Stitch ears on crown with a slight forward tilt.
Arms (make 2 in A)
CO 8 sts; join.
Rnd 1: kfb around (16)
Rnds 2–14: k around
Rnd 15: (k2, k2tog) ×4 (12)
Stuff lightly; BO. Flatten palm end. Sew at shoulder line, angled forward (right arm slightly lifted to hold cup).
Tail (Pom in A)
Wrap around two fingers 25–30 times; tie center; cut loops; trim to ~1 in / 2.5 cm. Stitch to lower back.
Pants (Denim Cuffs Peek)
Worked top-down so cuffs sit above sneakers.
Waistband (C): CO 48 sts; join.
Rnds 1–4: k2, p2 rib.
Rnds 5–16: k around.
Split for Legs: Place 24 sts per leg.
Knit each leg 14 rnds straight; BO.
Cuffs: With A, pick up 24 sts around each opening; k 2 rnds; BO. Slide on later before overalls.
Café Tee (Cream with Mint Stripes)
Worked flat; seamed; fitted cap sleeves.
Back (A): CO 36 sts.
Rows 1–3: k1, k1, p1 to last st, k1.
Rows 4–16: work stockinette, adding B single-row stripes every 3 rows (stripe spacing matches photo: thin mint bars on cream). End WS row.
Shoulders: BO 3 sts at start of next 2 rows; BO 2 sts at start of next 2 rows. BO remaining center neck stitches (leave ~14).
Front: Work as Back to Row 12, then continue stripe rhythm to Row 16. Shape neck: BO center 8 sts; each side BO 1 st at neck edge next 2 RS rows. Finish shoulders like back.
Seam shoulders.
Neckband: Pick up ~44 sts; k1, p1 rib 3 rnds; BO.
Sleeves: Pick up 28 sts around each armhole. Work 6 rnds stockinette plain A (no stripe). Finish with k1, p1 rib 3 rnds; BO. Mattress stitch sides.
Oat Overalls (D) with Bean Details
Classic bib-front overalls; leg hems end above the pant cuffs so blue shows.
Back Waistband: CO 44 sts; join.
Rnds 1–3: k around.
Rnds 4–12: stockinette in the round.
Leg divide: Place 22 sts per leg; knit each leg 10 rnds straight; BO. This creates short, slightly boxy legs that end mid-calf (leaving denim cuffs visible).
Front Bib (worked flat and attached):
Pick up 24 sts centered across front waist (leave side edges free).
Rows 1–12: stockinette.
Row 13 (RS): k2tog, k to last 2, ssk.
Row 14: p.
Repeat Rows 13–14 2 more times to 18 sts.
Rows 19–22: work even. BO.
Pocket: CO 10 sts; work 8 rows stockinette; BO. Sew to center of bib.
Bean Appliqués: Use E to duplicate-stitch two simple bean ovals—one on bib upper right, one on bag later. Add a centered split stitch to suggest a coffee bean seam.
Straps: Make 2 i-cords in D (CO 3 sts; knit 4.3 in / 11 cm each). Sew to top bib corners, cross over shoulders, and attach to back waistband with tiny stitched “buttons” (use C to hint at darker buttons like the photo).
Side definition: With C, embroider a single-row faux seam along bib edges for the “denim strap shadow” seen in the photo.
Mint Beanie with Bean Badge
Crown (B): CO 48 sts; join.
Rnds 1–6: k around.
Rnd 7: (k6, k2tog) ×6 (42)
Rnd 8: k around.
Rnd 9: (k5, k2tog) ×6 (36)
Rnd 10: k around.
Rib Ring: Switch to k1, p1 rib for 6 rnds to form a distinct brim line. BO loosely.
Bean Badge: With B knit a 10-st circle (CO 10, k 4 rows flat; gather edges into a coin). Duplicate-stitch a small bean in E and a white highlight in G. Tack the badge to front-left of beanie.
Sneakers (make 2)
Base/bumper (A): CO 20 sts flat; knit 2 rows garter (toe bumper).
Switch to B and pick up around bumper to work in the round—target 36 sts around shape.
Rnds 1–4: k around.
Rnd 5: (k4, k2tog) ×6 (30).
Rnd 6: k around.
Rnd 7: (k3, k2tog) ×6 (24).
Insert the thin oval sole; add a dab of glue if desired.
Rnds 8–10: k around.
Toe cap & collar (A): k 3 rnds; BO.
Laces: 2-st i-cord in A, 8–9 in / 20–23 cm. Thread through embroidered eyelets and tie small bows. Shoes slip on snugly.
📌Thank you for reading the article.
Cross-Body Satchel (B)
Body: CO 16 sts; knit in the round 12 rnds.
Flap: BO 8 sts; work remaining 8 flat for 6 rows; BO.
Strap: i-cord A, CO 2 sts; knit 9 in / 23 cm; attach to sides.
Closure: Sew a small wood-look button to body; make a yarn loop under the flap.
Bean Patch: Duplicate-stitch a coffee bean in E on the flap corner.
Latte Cup Accessory
Cup (F): CO 18 sts; join; k 5 rnds.
Rim (A): k 2 rnds; BO.
Bottom: With F, pick up and k2tog around to close; pull tight.
Foam: With G, duplicate-stitch a small heart on top.
Handle: i-cord 2 sts for 1 in / 2.5 cm; sew as a loop to side of cup. (Optional: embed a tiny magnet and a matching magnet inside the right paw to help the bunny “hold” the cup.)
Conical Coffee Grinder Props (Optional)
Not required for the doll; if you want knit props, work tiny brown boxes and sew a dark-gray dome on top. The photographed grinders are non-knit props; you can omit.
Assembly Order
- Stuff & close head/neck area as you knit; sculpt a gentle chin by taking a securing stitch from back of head to under nose.
- Attach ears slightly forward on crown.
- Sew arms with a forward tilt; right arm slightly higher to present the cup.
- Dress sequence: Pants → Tee → Overalls → Sneakers → Beanie → Satchel.
- Details: Stitch pocket edges, strap crossings, and place bean appliqués securely. Secure latte cup to the right paw with one invisible anchoring stitch if you’ll display it standing.
Exact Measurements (to match the photo)
- Head circumference: ~7.75 in / 19.5 cm
- Ear length: 2.7 in / 7 cm; width: 1.1 in / 2.8 cm
- Torso height (waist to neck): 2.8 in / 7.2 cm
- Arm length: 2.9 in / 7.4 cm
- Leg length (ankle to top thigh): 2.6 in / 6.5 cm
- Foot sole: 1.6 in / 4 cm long × 0.9 in / 2.3 cm wide
- Pants inseam: 1.6–1.8 in / 4–4.6 cm
- Overall bib: 1.4 in / 3.6 cm tall × 1.3 in / 3.3 cm wide
- Beanie height: 1.6 in / 4 cm from brim ring to crown
- Satchel body: 1.6 in / 4 cm wide × 1.4 in / 3.5 cm tall
- Latte cup height: 0.8 in / 2 cm
All dimensions assume the gauge listed; if your gauge differs, maintain the stitch counts but expect slight size changes.
Finishing & Realism Tips
- Edge definition: Backstitch around sneaker base in A to suggest a molded sole.
- Overalls crispness: Light steam block overall legs and bib before dressing; avoid steaming the stuffed bunny.
- Stripe neatness: Carry B up the front edge on the inside to avoid too many ends; weave in carefully so tee remains slim.
- Photo styling: Natural morning light, wooden table, a potted plant; place cup in right paw and turn beanie badge slightly left for the exact vibe.
Blocking, Care & Safety
- Spot clean or hand-wash cold; air dry flat.
- Replace button and safety eyes with embroidered versions for under-3s.
- Avoid harsh steaming directly on stuffed areas; steam accessories flat before attaching.
Troubleshooting
- Beanie rides up: Re-knit brim using k1 tbl, p1 for the last round to tighten.
- Overalls too loose: Thread a hidden elastic through the back waistband or remove a multiple of 4 sts at CO.
- Bunny won’t stand: Add a muslin pouch of poly-pellets inside each sneaker (securely sealed), or tack shoes to feet at heel.
